Junghanns.NET - Quality Statement
Deutsch|Support|Disclaimer|Contact us
HomeProductsOpen SourceSolutionsClientsPartnerDownload

duoBRIŪ 2.0 PCI Express ISDN

The duoBRIŪ 2.0 PCIe ISDN turns your legacy ISDN equipment (or analog equipment behind an ISDN TA) into powerful Voice over IP devices. It provides a soft migration path from ISDN technology to the new Voice over IP world.
Connect your ISDN PBXes at different locations with Voice over IP and drop costs for company internal calls close to zero. Transparently add least cost routing over ISDN or VoIP carriers to reduce costs on outbound calls significantly.

The duoBRIŪ 2.0 PCIe ISDN brings powerful ISDN BRI connectivity to your Linux machine. It comes with fully GPLed drivers for the Linux 2.4.X and 2.6.X kernels. All 4 BRI ports can be configured for TE or NT mode individually by jumpers. This port configuration is detected by the driver automatically.

The drivers can handle the user and network side of euroISDN (ETS 300 102) signalling, support for National ISDN 1 (Q.931) is planned.

Multiple duoBRIŪ 2.0 PCIe ISDN cards can be interconnected over an external PCM bus. The card's active channel switching capability (to bridge B channels on the card without latency and not using the host CPU) is also working over the external PCM bus (e.g. B channels on different cards can be actively switched).

Target applications
  • ISDN BRI PBX
  • ISDN least cost routers
  • Voice over IP BRI gateways
  • VoIP integration of ISDN equipment
  • PBX to PBX VoIP trunking

    Requirements
  • CPU 500+ Mhz
  • RAM 64+ MB
  • Linux 2.4.X or 2.6.X Kernel (2.6.X
    recommended)
  • PCIe Slot
  • Features
  • 2 Basic Rate Interface ports (I.421) for TE and
    NT mode
  • DTMF detection
  • Conference bridge
  • PCM bus connectors daisy chaining of max. 8
    cards
  • 4 dual-color LEDs (layer 1 state indicators)
  • active channel switching (across multiple cards
    over the external PCM bus)
  • Point-to-Point (TE / NT) and Point-to-Multipoint
    (TE / NT)
  • euroISDN protocol stack suitable for 3.3 volts PCIe Slots
  • optional onboard S0 bus power feeding module available

  • Home|The Company|Products|Solutions|Press|Reseller|Support|Contact
    Copyright 2000-2011 Junghanns.NET GmbH. All rights reserved. Privacy Policy - Terms and Conditions