Junghanns.NET - Quality Statement
Deutsch|Support|Disclaimer|Contact us
HomeProductsOpen SourceSolutionsClientsPartnerDownload

IP Switch

The IP Switch will be attached to any TCP/IP network and is accessible over it. The plugged devices can be turned on or off independently via ethernet.
Simply two steps are required for start-up. The connection to an existing power supply system as well as a TCP/IP network and the configuration of the IP settings. These can take place via DHCP or manually.
After assignment of IP settings, the IP Switch may be accessed via web browser in the same network. The access can be protected by an administrator and an user password.
It is also possible to access the IP Switch via command line tool (e.g. for automated or time controlled device switching).

  • Easy and fast start-up
  • Automatic configuration
    via DHCP
  • Ease of use
  • Cross platform
  • Independent switching of
    the eight sockets
  • Access protection by the use
    of optional administrator and
    user password
  • Integrated reset function
  • Accessible via command line tool

  • Technical Characteristics
  • Network connection: 10MBit
    10baseT Ethernet
  • Protocol: TCP/IP

  • Capacity per socket: max. 2000W
  • Over-all capacity: max. 3000W
  • Switching voltage: 230V

  • Operating temperature:

  • Home|The Company|Products|Solutions|Press|Reseller|Support|Contact
    Copyright 2000-2011 Junghanns.NET GmbH. All rights reserved. Privacy Policy - Terms and Conditions